.

Subscribe by email

TDA1308 stereo headphone amplifier circuit

This stereo headphone amplifier circuit based on TDA1308 integrated class-AB stereo headphone is manufactured in a 1 mm Complementary Metal Oxide Semiconductor (CMOS) process and has been primarily developed for portable digital audio applications.
You can use stereo headphone amplifier circuit diagram with TDA1308 or TDA1308A , the difference between the TDA1308 and the TDA1308A is that the TDA1308A can be used at lower supply voltages.

The maximum output power that can be obtained with this circuit is around 80 mwatts.
This audio amplifier circuit requires a very low voltage power supply : from 3 to 7 volts for single supply or 1.5 to 3 volts for dual supply .
The TDA1308A supports a low voltage input down to 1.2 volts , but the typical power supply required for both circuits is 5 volts for single supply and 2.5 volts for dual supply .
As you can see the circuit requires very few external components and can be configured to work in stereo or mono configuration .

TDA1308 integrated class-AB stereo headphone amplifier electronic project

Electronic Circuits: 

Comments

I have a set of amplified speakers that are powered by the same amp. My question is, How would I wire them to single 3 post volume control?