.

Subscribe by email

TDA7338 FM stereo decoder circuit

This compact design FM stereo decoder circuit is designed using the TDA7388 IC manufactured by ST Microelectronics .
The TDA7338 is a monolithic integrated FM stereo decoder circuit with noise blanking for FM car radio applications.
With the used BICMOS technique, the 19KHz Notch Filter, the PLL Filter and Phase Filter is realized on the chip with a Switched Capacitor concept.
The TDA7338 stereo decoder contains all necessary functions for processing the MPX signal.
The only external component needed for the PLL is the ceramic resonator for the oscillator which runs at 456kHz.
The pilot detector output is designed as an open collector output, therefore an external pull up resistor is needed. To force the decoder to "MONO" Pin 19 has to be clamped to a voltage below 0.8V.
Selecting VCO-OFF (Pin 7 to GND) the VCO is switched off and the SB and HCC are disabled.

Electronic Circuits: 
Circuit Diagram: 
TDA7338 FM stereo decoder circuit

Add new comment